Canon C50Fi VB-C50Fi manual.pdf - Page 159
Example of Creating a Screen for Distribution of a Still Image to a Mobile Phone
UPC - 013803049688
View all Canon C50Fi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
Example of Creating a Screen for Distribution of a Still Image to a Mobile Phone still.jpg parameters Command camera_id z or zoom b or back_light v or image_size option Description Specifies the camera when you switch between cameras. 1 is this camera, and 2 is an external camera. When there is no specification, you are deemed to have specified the current camera. Specifies the zoom magnification of the camera. z is ten times zoom magnification of maximum wide angle and zoom is in units of 0.01˚. Specifies camera backlight compensation. When this parameter is set to on, the picture captured will be bright and when this parameter is set to off, the picture captured will be dark. If this parameter is omitted, camera backlight compensation is not controlled. Specifies image size. You can specify 160 × 120, 320 × 240, and 640 × 480 for NTSC, and 192 × 144, 384 × 288, and 768 × 576 for PAL. The format for v and image_size is different. v only specifies horizontal size, e.g. v=640. image_size specifies vertical and horizontal size, e.g. image_size=320 × 240. Specifies how errors are dealt with. When "skip_on_error" is specified, the process will be continued. When "quit_on_error" is specified, the process will be aborted. The following errors can occur: failure to acquire camera control right, loss of camera control, camera selection errors and camera control errors. To omit, the default value is "quit_on_error". Specifying with the current position which appears as "d" and the percentage for the Tip current angle which appears as "c" (percentage) is also possible for z (zoom). For example: z=c200 sets twice the current zoom magnification. Creating Web Pages 5-29