Canon C50Fi VB-C50Fi manual.pdf - Page 152

Using the Viewer for PC to Distribute Videos Creating wvh Files This section describes how to create the wvh file required for launching the Viewer for PC application. 1. Use a text editor or similar program to create a new text file and type the following type of code in the file: (Example) 192.168.100.1 65310 192.168.100.1 65311 wvhttp:192.168.100.1 80 * The underlined portion is a sample IP address. Enter the actual IP address that was set on the VBC50Fi (→ P.3-6). ●The first line gives the IP address (or host name) of the VB-C50Fi and the TCP port number used for the video transmission. The default setting is 65310 (→ P.3-18). The default setting will be used if no particular value is specified. ●The second line gives the IP address (or host name) of the VB-C50Fi and the TCP port number used for the camera control. The default setting is 65311 (→ P.3-18). The default setting will be used if no particular value is specified. ●The third line gives the setting for the Viewer for PC to use HTTP protocol. After "wvhttp:", type in the IP address of the VB-C50Fi and "80" as the HTTP port number. As a result of this, you will be able to view video from the VB-C50Fi through firewalls. Instead of an IP address, you can also type in (→ P.5-9). Tip Example: 65310 65311 wvhttp: 80 2. After you save the text file and quit the text editor program, create a wvh file by changing the file name and extension. Be sure to add the ".wvh" extension, as in "WebView.wvh". 5-22 Viewer for PC supports WebView Livescope protocol and HTTP protocol. Tip ● WebView Livescope protocol: Cannot be viewed through firewalls. This protocol is primarily for clients who are connected directly to the Internet. ● HTTP protocol: In general, this protocol is used with Web browsers. By using this protocol, clients inside firewalls can view video by penetrating fire walls. The Viewer for Java also uses this protocol.