Canon C50Fi VB-C50Fi manual.pdf - Page 202
Upgrading the Firmware Remotely
![]() |
UPC - 013803049688
View all Canon C50Fi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 202 highlights
Upgrading the Firmware Remotely Get the new firmware from the WebView Product web site (http://www.canon.com/webview), and upgrade in command prompt. The firmware file is called "Firmware_new.bin" and is saved on your PC in "My Documents". 1. Open command prompt. C:\Documents and Settings\xxxx> is displayed on the screen. 2. Specify the folder containing the firmware. Enter: C:\Documents and Settings\xxxx>cd My Documents 3. Use the ftp command and connect to the VB-C50Fi. Enter: C:\Documents and Settings\xxxx\My Documents>ftp 192.168.100.1 4. Enter Administrator account and password. Enter: User (192.168.100.1: (none)): root Password: VB-C50i * Enter the password you are actually using. For more details about changing passwords, please refer to "Setting up the Administrator Passwords and Ethernet etc." (→ P.3-5). 5. Change to binary mode. Enter: ftp> binary 6. Send the firmware to the VB-C50Fi. Enter: ftp> put Firmware_new.bin flash 7. Transmission begins. It normally takes 1-2 minutes to complete transmission. 8. Notification of completion. "The system upgraded completed successfully" is displayed. 9. Log out of the VB-C50Fi and close command prompt. Enter: ftp> bye C:\Documents and Settings\xxxx\My Documents> exit Do not turn the power off until you have confirmed that the VB-C50Fi has restarted. Note Turning the power off before completion may prevent it from starting up properly. ● The underlined portion is a sample IP address. Enter the actual IP address that Tip was set on the VB-C50Fi (→ P.3-6). ● The user name you are using is displayed in "xxxx" (Windows 2000/XP only). 7-8
![](/manual_guide/products/canon-c50fi-vbc50fi-manualpdf-8cc199c/202.png)