Canon C50Fi VB-C50Fi manual.pdf - Page 24

System Components and Their Operation Rear On the rear of the VB-C50Fi there are the MAC address required for network settings, a Reset switch that returns the factory default settings and the serial number. MAC address The MAC address is required when setting the IP address and making other network settings. Please make a note of it before installing this unit (→ P.2-8). Serial No. The serial number for this unit is shown here. Model Number VB-C50Fi NTSC xx-xxx PAL xx-xxx Screw hole for arm mounting Power connection socket Multi-connector You can connect the Multi-Terminal Module (VB-EX50) to the VBC50Fi via the connector (→ P.1-10). Reset switch You can revert all settings of the unit to the factory default settings by pressing this button with a thin-tipped object while turning on the power switch, and keeping the button pressed for more than five seconds after turning on (→ P.7-10). 100/10 BT Ethernet connector (100Base-TX, 10Base-T Auto-Negotiation) Bottom Screw hole for tripod mounting 1-8