Canon C50Fi VB-C50Fi manual.pdf - Page 204
If the IP Address and Password are Unknown
UPC - 013803049688
View all Canon C50Fi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 204 highlights
Restoring the Factory Default Settings If you click the "OK" button at this point, it will not possible to abort the process to Note restore the default settings. Click the "Cancel" button if you do not wish to restore the default settings. 4. The VB-C50Fi's factory default settings are restored. Settings other than the Administrator password, or network-related settings such as the VBC50Fi's IP address, subnet mask, and default gateway address are returned to factory default settings. If the IP Address and Password are Unknown If the VB-C50Fi's IP address or administration password are not known or have been forgotten, the VB-C50Fi cannot be operated over a network. In this case, press the Reset switch at the rear of the unit. 1. Turn off the VB-C50Fi. See page 2-6 "Turning the Power ON and OFF" for procedures on how to turn OFF and ON the VB-C50Fi's power switch. 2. While pressing the Reset switch, turn on the power and keep the Reset switch pressed from more than 5 seconds. The Reset switch is located toward the rear on the bottom. Use a thin tipped object such as the end of a paper clip to press the Reset switch. All settings in the VB-C50Fi will be returned to the factory default settings. If the Reset switch is pressed and all factory default settings are restored, the VB-C50Fi's Note network-related settings such as IP address, subnet mask, and default gateway address are all also returned to the factory default settings, making it impossible to operate the VB-C50Fi from a PC connected to it. Use "VBSetup.exe" on the supplied CD-ROM to set an IP address appropriate to the environment you will be using (→ P.2-7). 7-10