Canon C50Fi VB-C50Fi manual.pdf - Page 196
Troubleshooting
UPC - 013803049688
View all Canon C50Fi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 196 highlights
Troubleshooting Before you contact your Canon dealer or service outlet, check the items listed below. If a log message is displayed, refer to the log message list for the log details and the appropriate response. The VB-C50Fi does not start up. ●Check that the AC cable is connected correctly. ●Switch the VB-C50Fi off and then on again (→ P.2-6). VBSetup.exe does not work. ●Check that the LAN cable used for setup is connected correctly. ●Try turning off the power to the VB-C50Fi, then turning it on again (→ P.2-6). There will no longer be any effect on VBSetup.exe 20 minutes or more after power is turned on. ●Check to see if the VB-C50Fi and the PC running VBSetup.exe are connected to the same network segment. The VB-C50Fi sample page does not appear. ●Check that the LAN cable is connected correctly. ●Check that the VB-C50Fi network settings are correct. In particular, check that the IP address, subnet mask and default gateway address settings are valid for the network you are using. ●If you have changed the IP address, the new IP address does not take effect until the VBC50Fi is rebooted. ● If access control for the VB-C50Fi is being used, check the settings (→ P.3-20). ●Check that the IP address or URL settings in the viewer software are correct. ●When using the router's NAT function, be sure the VB-C50Fi's IP address in the Web page is correct (→ P.5-26). The video does not appear. ●Check that the viewer software is correctly installed (→ P.7-6). Please refer also to the Viewer Software User's Manual (Viewer-E.pdf) contained on the supplied CD-ROM. ● If the video quality is poor, check the quality settings on the VB-C50Fi (→ P.3-7). Also, check settings such as the number of background colors as on the viewer PC. ●You can limit the number of viewers that can access the VB-C50Fi at the same time. When this limit is exceeded, a message is displayed instead of a video (→ P.3-16). ●If you cannot see the video using the Viewer for Java, check your system environment such as the browser version (→ P.1-4). To use the Viewer for Java, you need to install Java VM beforehand. See the web site for more details. WebView Product web site http://www.canon.com/webview 7-2