Canon C50Fi VB-C50Fi manual.pdf - Page 43
Setting Up the Administrator Password and Ethernet etc. System and Network
![]() |
UPC - 013803049688
View all Canon C50Fi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Basic Settings Setting Up the Administrator Password and Ethernet etc. (System and Network) You can perform the following settings with System and Network. ●Root Account: For setting up passwords. ●Ethernet: For setting up IP addresses and other settings necessary for connection to the network. ●Connection Keeping: For setting up the function whereby packets are periodically transmitted and there is automatic dial-up by the router so that the connection with the network is not broken. When you have made changes to the settings, click the "OK" button to return to the Settings Title Page. If you do not make any changes, click the "Cancel" button. Root Account 1 2 1 "Password" Sets the password. Up to 8 ASCII characters can be used (spaces or printable characters). The default setting is "VB-C50i". 2 "Confirm Password" Confirms the password in the field above. ● For reasons of system security, You must change the administrator password. Note However, be sure to remember the password (→ P.7-11) so that you do not forget it. ● If you have forgotten the password, press the Reset switch and restore the factory default settings (→ P.7-10). However, note that all settings are returned to the factory default settings. 3-5
![](/manual_guide/products/canon-c50fi-vbc50fi-manualpdf-8cc199c/43.png)