Canon DP-V2410 User Manual - Page 27
Using the Channel (CH) Button, Checking Signal Information and Status of the Main Unit
View all Canon DP-V2410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Using the Channel (CH) Button You can assign channels (various settings related to input signal) to the CH buttons on the video display and switch channels instantly. 1. Press the MENU button to open the OSD menu. 2. Select "System Settings" → "Function/Channel Button" → "Display Channel" and press the jog dial to determine the selection. A new window opens and displays button names CH1 to CH3. 3. Select the name of the button using the jog dial and press the jog dial to determine the selection. The selection frame moves to next OSD menu level. 4. Select the channel to assign using the jog dial. See "Channel Settings" ( 43) for the configurable settings. 5. Press the jog dial to determine the selection. The setting is confirmed. The following content is assigned to channel buttons on the video display by factory default. CH Input Configuration Select Input Signal Format Internal Sync Channel Name Picture Mode Color Range CH1 3G/HD-SDI Automatic Automatic Off (Blank) ITU-R BT.709 Automatic CH2 HDMI Automatic Automatic Off (Blank) ITU-R BT.709 Automatic CH3 3G-SDI RAW Automatic Automatic Off (Blank) Canon Log Automatic Checking Signal Information and Status of the Main Unit The video display is equipped with a banner function which displays signal information or the status of the main unit. 1. Press the jog dial when the OSD menu is closed. The channel name, signal information, and status of the main unit will be displayed in the banner. It will automatically disappear after 6 seconds. Note • For more detailed signal information, please refer to the section on "Signal Information" ( 65). • The "Detecting sync." banner will continue to appear until the input signal is synchronized. Operating the Video Display 27