Canon DP-V2410 User Manual - Page 66
Main specifications/Performance
View all Canon DP-V2410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Main specifications/Performance Panel Panel Type Screen Size Aspect Ratio Resolution Active Display Area Pixel Pitch Panel Driver Image quality Brightness (Standard) View Angle (Up, Down, Left, Right) Surface Treatment General Backlight Type Power Power consumption Environmental Conditions Operating Storage/ Transporting Dimensions (width x height x depth) Weight Mounting Hole Pitch Interface Input 3G/HD/SD-SDI Output Control HDMI 3G/HD-SDI Head phone USB LAN IPS LCD panel 24 inch (61.1 cm) 17:9 4096x2160 (8.8 megapixels) Approximately 540.7 x 285.1 mm 132 µm/193 ppi 1024 gradations, 10-bit for each RGB color 100 cd/m2 89° (contrast ratio 10 : 1 or higher) Anti-glare coating RGB LED, direct down type Rated Voltage: 100 - 240 V AC Rated Frequency: 50/60 Hz 24 V - 28 V DC Max. 8.9 A, XLR terminal At maximum load (including change in brightness through aging): Approximately 210 W At factory shipment: Approximately 160 W Temperature and humidity: 0 - 40 °C (32 - 104 °F), 20 - 85 %RH (no condensation) recommended: 15 - 30 °C (59 - 86 °F) Pressure: 700 - 1060 hPa Temperature and humidity: -20 - 40 ˚C (-4 - 104 °F), 20 - 85 %RH (no condensation) 41 - 60 ˚C (105 - 140 °F), 20 - 30 %RH (no condensation) Pressure: 700 - 1060 hPa Including stands: Approx. 594×399×187 mm (23.4×15.7×7.4 in.) Main unit only, excluding protrusions: Approx. 594×378×106 mm (23.4×14.9×4.2 in.) Approximately 12 kg (26.4 lb) VESA standard 100 x 100 mm (3.9 x 3.9 in.) 4 (1 systems) BNC (75Ω) receptacle terminal 3G-SDI: SMPTE 2048-2/274M/296/372/425-1/428-19/428-9 compliant HD-SDI: SMPTE 2048-2/274M/292-1/296/428-19/428-9 compliant SD-SDI: Compliant with SMPTE-259M 1 (1 system) type A terminal Contents protection standard: HDCP 2.2 4 (1 pass-thru systems) 1 stereo mini jack, Supported impedance: 32 Ω to 64 Ω 1 USB A receptacle terminal Universal Serial Bus Specification Revision 2.0 compliant LS (Low Speed)/FS (Full Speed)/HS (High Speed) mode compatible Compliant with Enhanced Host Controller Interface Specification for Universal Serial Bus Revision 1.0 1 RJ-45 terminal Compliant with IEEE802.3 10BASE-TX/IEEE802.3u 100BASE-TX 66 Main specifications/Performance