Canon DP-V2410 User Manual - Page 57
CH CH1-CH2, White, Gray 20%, Black, Red, Green, Blue, Ramp, 5 Step, Color Bars, PLUGE, Off
View all Canon DP-V2410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Item Audio Level Meter Setting Options (underline indicates factory default) Configures various settings for the audio level meter. Displays the audio level of the selected channel number. Note • "Audio Level Meter" cannot be displayed when "Frame Hold" is "On", during the execution of "Playback File" under "Screen Capture", or when "Test Pattern" is displayed. Enable Switches the audio level meter On, Off. On, Off Channel Number (SDI) Sets the number of channels displayed when SDI signal is input. Options change according to the setting for "SDI Group" under "Audio Settings". When "CH1-CH8" is selected for "SDI Group": 2 CH (CH1-CH2), 4CH (CH1-CH4), 6CH (CH1-CH6), 8CH (CH1-CH8) When "CH9-CH16" is selected for "SDI Group": 2 CH (CH9-CH10), 4CH (CH9-CH12), 6CH (CH9-CH14), 8CH (CH9-CH16) Channel Number (HDMI) Sets the number of channels displayed when HDMI signal is input. 2CH (CH1-CH2), 4CH (CH1-CH4), 6CH (CH1-CH6), 8CH (CH1-CH8) Peak Hold When set to "On", one second of audio signal at the peak is kept. On, Off Standard Level Sets the standard level. -40 to 0 (-20) Test Pattern Sets the test pattern built into the main unit. White, Gray (20%), Black, Red, Green, Blue, Ramp, 5 Step, Color Bars, PLUGE, Off Note • If the power is turned off once and then back on, the test pattern will not be displayed. • The test pattern will be erased in the following cases: - When calibration has been started - When the channel is changed using the CH button, F button assigned for Channel UP/ Channel DOWN, or "Select Channel" under "Channel Settings" - When changing "Input Configuration" or "Select Input Signal" under "Channel Settings" - When "Reset All Settings" is executed OSD Menu 57