Canon DP-V2410 User Manual - Page 44

Item Internal Sync Channel Name Picture Mode Color Range Setting Options (underline indicates factory default) Synchronizes four inputs for "4K Input". On: Force synchronization. Off: Do not force synchronization. Sets the name of the selected channel. You can input up to 16 alphanumeric characters. Sets the "Picture Mode". Sets the quantization range for SDI and HDMI respectively. Automatic: Sets the range based on signal information automatically. Full (0-255): Sets to Black level: 0; White level: 1023 (10-bit)/4095 (12-bit). Limited 1 (16-235): Limits the black and white range. Black level: 64 (10-bit)/256 (12-bit) White level: 940 (10-bit)/3760 (12-bit) Limited 2 (16-255): Limits the black range. Black level: 64 (10-bit)/256 (12-bit) White level: 1023 (10-bit)/4095 (12-bit) Note • Setting is disabled when "ACESproxy" is selected for "Picture Mode" or "ACESproxy" is selected for "Color Gamut". • Operations when "Automatic" is selected are described below. -- When HDMI is selected, "Full (0-255)" or "Limited 1 (16-235)" is set automatically depending on HDMI signal information. -- When "DCI-P3" is selected for "Picture Mode", or "DCI-P3", "Cinema Gamut to DCI" or "DCI-P3+ to DCI" is selected for "Color Gamut", "Full (0-255)" is set. -- When "Canon Log" or "Canon Log 2" is selected for "Gamma", "Limited 2 (16-255)" is set. -- "Limited 1 (16-235)" is set in the other cases. The factory default settings for each channel is shown in the following table. CH Input Configuration Select Input Signal Format Internal Sync Channel Name Picture Mode Color Range CH1 3G/HD-SDI Automatic Automatic Off (Blank) ITU-R BT.709 Automatic CH2 HDMI Automatic Automatic Off (Blank) ITU-R BT.709 Automatic CH3 3G-SDI RAW Automatic Automatic Off (Blank) Canon Log Automatic CH4 to CH30 - Automatic Automatic Off (Blank) ITU-R BT.709 Automatic - : not set 44 OSD Menu