Canon DP-V2420 User Manual - Page 18
Mounting the Main Unit on a Stand or Wall
View all Canon DP-V2420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Mounting the Main Unit on a Stand or Wall This main unit can be fitted to a stand* or to a wall mount bracket*. Remove the stands beforehand ( 16). * Commercially available. CAUTION • For safety, make sure to perform this step with at least two people. • When mounting the main unit on a wall, make sure the wall has sufficient strength. If necessary, apply reinforcement. Also, make sure to check the load capacity of the stand or wall mount bracket. • When the video display is placed on a rack or display stand and ventilation around it is blocked by equipment placed above or below or in a surrounding area, the operating temperature may increase, causing a failure or overheating. In order to maintain the operating temperature condition of the video display (0 ˚C to 40 ˚C), make a space of at least 1U (4.4 cm) above and below and at least 4 cm (1.6 in.) space from its back. Make a sufficient space from peripheral equipment, secure vents, or install a ventilation fan. • When installing the video display on a wall, make sufficient space from the wall so that cables are not squeezed or twisted. • Avoid touching the screen during this step as it may damage it. • Make sure that the main unit does not fall during installation/removal. 1. Attach a commercially available stand or wall mount bracket using the screw holes on the back or side face of the main unit ( 77). The screw hole size is shown below. 6×M4 5 mm deep (Max.) 2×M4 Rear 8 mm deep (Max.) Side Same on the other side 18 Installation/Connection