Canon DP-V2420 User Manual - Page 50
Input A, Automatic, 4:2:2 YCbCr 10-bit
View all Canon DP-V2420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Item Format Internal Sync Channel Name Picture Mode Picture Mode R Audio Input Marker/TC/WFM/VEC Input Setting Options Sets the color format and gradation. ■■ SDI Signal Automatic, 4:2:2 YCbCr 10-bit, 4:2:2 YCbCr 12-bit, 4:4:4 YCbCr 10-bit, 4:4:4 YCbCr 12-bit, 4:4:4 RGB 10-bit, 4:4:4 RGB 12-bit, 4:4:4 XYZ 10-bit, 4:4:4 XYZ 12-bit ■■ HDMI Signal Automatic, 4:4:4 XYZ 12/10-bit Note • HD-SDI signal is "4:2:2 YCbCr 10-bit" regardless of the setting. • "SD-SDI" is fixed to "4:2:2 YCbCr 10-bit". • For "3G-SDI RAW", the setting is fixed to "Automatic". • If set to "Automatic" when receiving 3G-SDI, all signals without a payload format will be rendered in "4:4:4 RGB 10-bit". In addition, if there is one Payload or more of the four inputs, they are rendered in a Payload that is selected in the order of priority A → B → C → D in the display area. • To use 4:4:4 XYZ 10-bit for SDI signals, select "4:4:4 XYZ 10-bit". Then, signals will be processed as signals where XYZ data is included in RGB data output in 4:4:4 RGB 10-bit format. Sets whether to synchronize four inputs when "Square Division" is selected. On: Force synchronization. Off: Do not force synchronization. Sets the name of the selected channel. You can input up to 16 alphanumeric characters. Sets the "Picture Mode". Sets the picture mode for the right screen in the "Multi View (Dual)" display. Sets the audio terminal. Terminals that can be selected differ according to the setting of "Select Input Signal." When "Automatic" or "Quad Input": Input A, Input B, Input C, Input D When "Dual Input A,B": Input A, Input B When "Dual Input C,D": Input C, Input D Note • When "Single" is selected, this is fixed to input signal terminal. In the "Multi View (Quad)" or "Multi View (Dual)" display, sets the target terminal so that various markers (except Grid Marker), Time Code, Wave Form Monitor, Vector Scope and Camera Information are displayed. (Camera Information is available in the "Multi View (Quad)" display only) When "Automatic" or "Quad Input": Input A, Input B, Input C, Input D When "Dual Input A,B": Input A, Input B When "Dual Input C,D": Input C, Input D Note • This setting becomes invalid except for the "Multi View (Quad)" or "Multi View (Dual)" display. 50 OSD Menu