Canon DP-V2420 User Manual - Page 59
On, Off, Black, Thick, Normal, Thin, White, Red, Green, Blue, Yellow, Cyan, Magenta, High, Low
View all Canon DP-V2420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Item Area Marker Setting Options (underline indicates factory default) "Area Marker" is used to check a specific area using a rectangular box. Enable H Position V Position Width (dot) Height (dot) Mask Line Line Width Line Color Line Brightness Note "Area Marker" is not displayed in the following cases: • When there is no signal, unsupported signal, or a channel with "Input Configuration" not set is selected • When an enlarged image is displayed • During the execution of "Playback File" under "Screen Capture" • When a "Test Pattern" is displayed Switches the area marker On, Off. On, Off Sets the start position (x-coordinate) to draw the rectangle (in increments of 2). 0 to 4086 (240) Sets the start position (y-coordinate) to draw the rectangle (in increments of 2). 0 to 2150 (120) Sets the width of the rectangle (in increments of 2). 10 to 4096 (240) Sets the height of the rectangle (in increments of 2). 10 to 2160 (120) Switches the mask color (in the marker). Black, Half, Off Turns On/Off the outlines of the rectangular box. On, Off Sets the width of the area marker line. Thick, Normal, Thin Sets the color of the area marker line. White, Red, Green, Blue, Yellow, Cyan, Magenta Sets the brightness of the area marker line. High, Low OSD Menu 59