Canon DP-V2420 User Manual - Page 42

Item HDR Range Setting Options (underline indicates factory default) Sets the display method when Gamma for HDR display is selected. Canon Log (HDR): Sets the "Canon Log" dynamic range to be displayed, from 0 to 800%. (in 100 increments) 100 to 800 Canon Log 2 (HDR): Sets the "Canon Log 2" dynamic range to be displayed, from 0 to 1600%. (in 100 increments) 100 to 1600 Canon Log 3 (HDR): Sets the "Canon Log 3" dynamic range to be displayed, from 0 to 1600%. (in 100 increments) 100 to 1600 SMPTE ST 2084: Sets the "SMPTE ST 2084" dynamic range to be displayed, from 0.005 to 10,000 nit. (in 100 increments) 100 to 10000 (1000) Hybrid Log-Gamma Y/RGB: Sets how far to display the "Hybrid Log-Gamma" dynamic range. (100 to 1000 in increments of 100) The upper limit value will change to match the settings of "Hybrid Log-Gamma System". ( 45) Hybrid Log-Gamma Y: 100 to 1000/2000/4000 Hybrid Log-Gamma RGB: 100 to 1000/2000  Setting procedures The procedures below use Canon Log 2 (HDR) as an example. When the maximum value (1600) is specified, the 1600% dynamic range of Canon Log 2 is assigned to the dynamic range of the video display. Although the brightness in appearance lowers, you can check the dynamic range included in video signals. When "1200" is specified, the part exceeding 1200% of Canon Log 2 is clipped (gradation is saturated) and the part up to 1200% is assigned to the dynamic range of the video display. The brightness of the video display corresponds to the value set for Contrast. Canon Log 2 1600% signal (Contrast: "12000") Canon Log 2 (HDR): Set to "1600" Canon Log 2 (HDR): Set to "1200" Canon Log 2 range DP-V2420 range Canon Log 2 range DP-V2420 range Gradation is reproduced by assigning 1600% the range to the range of the DP-V2420 (which 1200% lowers the brightness). 1600% 1200% Clip (Saturates gradation.) 1200% Brightness value corresponding to the contrast setting 42 OSD Menu