Canon EOS 10D EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 14

Connecting the Camera to Your Computer Before downloading images to your computer or specifying the camera settings, you must connect the camera to your computer with the dedicated IEEE1394 cable. You can connect the camera while your computer is running. Connecting the Camera to Your Computer for the First Time When you connect the camera to your computer for the first time to complete the installation, follow the procedure below right after performing "Installing the Software" (W-4). 1 Plug the dedicated cable into the computer. O Plug the cable into the IEEE1394 port. O Refer to the computer User's Manual for information on the terminal areas. O With the EOS-1Ds and EOS-1D, you can connect either plug (6-pin IEEE1394 port). 2 Plug the dedicated cable into your camera. O Open the cover and plug the cable into the < > terminal. O With the EOS-1Ds and EOS-1D, you can connect either plug (6-pin IEEE1394 port). 3 Set the camera's power switch to . O When the pop-up menu appears and then disappears automatically, the installation is complete. W-8