Canon EOS-1D C EOS 1D X Instruction Manual - Page 212

3 Menu Function Settings Silent LV shooting • Mode 1 The shooting operation noise is quieter than with normal shooting. Continuous shooting is also possible. At , the maximum continuous shooting speed will be approx. 12 shots/sec. At , it will be approx. 14 shots/sec. • Mode 2 When the shutter button is pressed completely, only one shot will be taken. While you keep holding down the shutter button, the camera operation will be suspended. Then when you return to the shutter button's halfway position, the camera operation will resume. The shooting noise is thereby minimized. Even if continuous shooting is set, only a single shot will be taken. • Disable Be sure to set this function to [Disable] if you use a TS-E lens (other than those listed in below) for shifting or tilting the lens or if you use an Extension Tube. Setting it to [Mode 1] or [Mode 2] will result in incorrect or irregular exposures. When you press the shutter button completely, the shutter will sound like it took two shots. However, only one shot will be taken. If you use flash, silent shooting will not be possible regardless of the [Silent LV shoot.] setting. When using a non-Canon flash unit, set this function to [Disable]. The flash will not fire if it is set to [Mode 1] or [Mode 2]. If the ISO speed is set to ISO 32000 or higher (when the camera's internal temperature is low, ISO 20000 or higher), the maximum continuous shooting speed at will be approx. 10 shots/sec. With the TS-E17mm f/4L or TS-E24mm f/3.5L II lens, you can use [Mode 1] or [Mode 2]. Metering timer You can change how long the exposure setting is displayed (AE lock time). If you select [z1: Set Custom WB], [z3: Dust Delete Data], [53: Sensor cleaning], [54: Clear all camera settings], or [54: z Firmware ver.], the Live View shooting will end. 212