Canon EOS-1D C EOS 1D X Instruction Manual - Page 311

wPrinting Trimming the Image Tilt correction You can crop the image and print only the trimmed portion as if the image was recomposed. Set the trimming right before printing. If you set the trimming and then set the print settings, you may have to set the trimming again before printing. 1 On the print setting screen, select [Trimming]. 2 Set the trimming frame size, position, and aspect ratio. The image area within the trimming frame will be printed. The trimming frame's aspect ratio can be changed with [Paper settings]. Changing the trimming frame size Turn the dial to change the trimming frame size. The smaller the trimming frame, the larger the image magnification will be for printing. Moving the trimming frame Use to move the frame over the image vertically or horizontally. Move the trimming frame so that it covers the desired image area. Rotating the frame Pressing the button will toggle the trimming frame between the vertical and horizontal orientations. This enables you to create a vertically oriented print from a horizontal image. Image tilt correction By turning the dial, you can adjust the image tilt angle up to ±10 degrees in 0.5-degree increments. When you adjust the image tilt, the icon on the screen will turn blue. 3 Press to exit the trimming. X The print setting screen will reappear. You can check the trimmed image area on the upper left of the print setting screen. 311