Canon EOS-1D C EOS 1D X Instruction Manual - Page 30
Charging the Battery
![]() |
View all Canon EOS-1D C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Charging the Battery 1 Connect the charger to a power outlet. Connect the power plug to a power outlet, and connect the power cord to the charger. When no battery is attached, all the indicator lamps will be off. 2 Remove the protective covers. As shown in the illustration, detach the charger's protective cover (provided) and the battery's protective cover (provided). 3 Recharge the battery. Slide the battery into the charger's slot as shown by the arrow, and make sure it is securely attached. You can attach the battery to slot A or B. X The battery will start recharging and the green status lamp will blink. X When the battery is fully charged, all three Charge level indicators will light up (50%/80%/100%). It takes approx. 130 min. for LP-E4N and approx. 120 min. for LPE4 to fully recharge a completely exhausted battery at 23°C/73°F. The time required to recharge the battery will vary greatly depending on the ambient temperature and the battery's remaining capacity. The LC-E4N charger cannot charge any battery other than the Battery Pack LP-E4N/LP-E4. Depending on the battery's condition, charge may not reach 100%. 30
![](/manual_guide/products/canon-eos1d-c-eos-1d-x-instruction-manual-4b3998b/30.png)