Canon EOS-1D C EOS 1D X Instruction Manual - Page 329
AE Microadjustment, FE Microadjustment
![]() |
View all Canon EOS-1D C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 329 highlights
3 Custom Function Settings AE Microadjustment Normally, this adjustment is not required. Perform this adjustment only if necessary. Note that performing this adjustment may prevent the correct exposure from being achieved. You can fine-tune the standard for exposure metering. This adjustment can help if automatic exposure always makes the image look too dark or too bright even without any exposure compensation. OFF: Disable ON: Enable Select [Enable] and press the button. The adjustment screen will appear. The adjustment can be made up to ±1 stop in 1/8-stop increments. If the exposure metering tends to underexpose, set it to the plus (+) side. If it tends to overexpose, set it to the minus (-) side. FE Microadjustment Normally, this adjustment is not required. Perform this adjustment only if necessary. Note that performing this adjustment may prevent the correct flash exposure from being obtained. You can fine-tune the camera's standard for flash exposure. This adjustment can help if the automatic flash exposure always makes the subject look too dark or too bright even without any flash exposure compensation. OFF: Disable ON: Enable Select [Enable] and press the button. The adjustment screen will appear. The adjustment can be made up to ±1 stop in 1/8-stop increments. If the flash exposure metering tends to underexpose the main subject, set it to the plus (+) side. If it tends to overexpose the main subject, set it to the minus (-) side. 329
![](/manual_guide/products/canon-eos1d-c-eos-1d-x-instruction-manual-4b3998b/329.png)