Canon EOS C300 Mark II CINEMA RAW DEVELOPMENT INSTRUCTION MANUAL Version 1.4 M - Page 3

Introduction About Introduction Cinema RAW Development Cinema RAW Development allows you to develop, play back and export Canon RAW files (referred to as "RAW clips" in this manual) shot with Canon digital cinema cameras. This software is also compatible with RAW clips recorded using a color space with a wider gamut than BT.709 (Cinema Gamut, BT.2020 or DCI-P3+). The following are the main features of Cinema RAW Development. Develop and play back Develop RAW clips stored on your computer and simultaneously 03 play the clips back. Develop and export Develop RAW clips stored on your computer and export the clips as DPX files, OpenEXR files or MOV files. You can also copy RAW clips as is. NOTES When you use this software, make sure to set your computer so that it does not enter sleep mode. Conventions in the Manual Important precautions related to the software's operation. Additional information that complements the main procedure. 0 Reference page number in this instruction manual. File > Open This font is used to indicate menu options and commands, as they appear onscreen. • For the most part, screens shown in this manual were captured on a computer running Mac OS X, ver. 10.9. Actual screens may differ slightly. Disclaimers • This software was developed for exclusive use with RAW clips created using a Canon digital cinema camera and external recorder compatible with Canon RAW data. • While every effort has been made to ensure that the information contained in this manual is accurate and complete, Canon shall not be liable for any damages resulting from corrupted or lost data due to mistaken operation or malfunction of the software. • Your camera may not support all of the features and functions described in this manual. Screens show clips recorded using a Canon EOS C500 digital cinema camera and external recorder. • The software records internal operations, including full path information of the clips used, on a log file kept on the hard disk. The information recorded will be used only for the purpose of providing technical support in case of a problem with the software.