Canon FAXPHONE B95 FAXPHONE B95 User's Guide - Page 64

2 Use [ ] or [ ] to select CALLER ID.  Press [Start/Copy]. OFF • To disable Caller ID feature, use [ ] or [ ] to select OFF, then press [Start/Copy]. Press [Stop] to return to standby mode. • To enable Caller ID feature, use [ ] or [ ] to select ON and continue with the steps below. 3 Press [Start/Copy]. 4 Use [ ] or [ ] to select the type of CALL REJECTION setting you want.  Press [Start/Copy]. You can select from the followings: • ANONYMOUS: The fax rejects calls from any callers who have blocked their phone/fax number from the Caller ID service. • SELECTIVE: The fax rejects calls from specific phone/fax numbers you place in NUMBER TO REJECT list (see below). • OUT OF AREA: The fax rejects calls from any callers in an area that does not have the Caller ID service. • SHOW IN HISTORY?: Determine if the fax stores phone/fax number for rejected calls in memory. 5 Use [ ] or [ ] to select ON (YES).  Press [Start/Copy]. • If you set to OFF, the setting goes on to the next CALL REJECTION setting. • If you set SHOW IN HISTORY? to YES or NO, the setting returns to ANONYMOUS. 6 • If you set ANONYMOUS or OUT OF AREA to ON, proceed to step 11. • If you set SELECTIVE to ON, register the specific phone/fax numbers you want to reject in NUMBER TO REJECT list. Follow the steps below. 7 Press [Start/Copy]. 8 Use [ ] or [ ] to select the number of NUMBER TO REJECT list (00-09) under which you want to register the phone/fax number.  Press [Start/Copy]. 9 Enter the phone/fax number using the numeric buttons.  Press [Start/Copy]. 10 To assign additional numbers, repeat the procedure from step 8. To finish, press [Function].  Press [Start/Copy]. 6-8