Canon LV-5200 Owners Manual - Page 22

COMPUTER INPUT (RGB Scart 21-Pin Video Input) SELECTING THE INPUT SOURCE DIRECT OPERATION Choose either Computer 1 or Computer 2 by pressing the INPUT button on the Top Control or on the Remote Control Unit. If the projector cannot reproduce a proper image, select the correct input source through the "MENU OPERATION" (see below). INPUT button Computer 1 ✽ Computer 2 Video ✽ Computer 1 is not displayed when RGB IN 1/ OUT terminal is used as MONITOR OUT. MENU OPERATION 1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button to move the red frame pointer to the INPUT Menu icon. 2 Press the POINT DOWN button to move the red arrow pointer to either Computer 1 or Computer 2 (Computer 1 is not displayed when MONITOR OUT is selected in the SETTING Menu.), and then press the SET button. The Source Select Menu will appear. 3 Move the pointer to the correct input source and then press the SET button. RGB When the input source is coming from a computer through RGB IN 1 / OUT terminal, select RGB. RGB (Scart) When the input source is coming from a DVD player through RGB IN 1 / OUT terminal, select RGB (Scart). RGB (Digital) When the digital signal is connected to DVI terminal, select RGB (Digital). RGB (Analog) When the analog signal is connected to DVI terminal, select RGB (Analog). INPUT MENU Computer 1 INPUT Menu icon Move the pointer either Computer 1 or Computer 2 and press the SET button. Source Select Menu Move the pointer to RGB or RGB (Scart) and press the SET button. Computer 2 Source Select Menu Move the pointer to RGB (Digital) or RGB (Analog) and press the SET button. ✽ Computer 1 is not displayed when RGB IN 1/ OUT terminal is used as MONITOR OUT. NOTE G Computer 1 can be selected when RGB IN 1 / OUT terminal is set as COMPUTER 1 at the menu item "Terminal" in the SETTING Menu. (Refer to page 36.) 22