Canon LV-5200 Owners Manual - Page 31

VIDEO INPUT SELECTING THE INPUT SOURCE DIRECT OPERATION Choose Video by pressing the INPUT button on the Top Control or on the Remote Control Unit. If the projector cannot reproduce a proper video source, select correct input source through the "MENU OPERATION" (see below). RGB Scart Input To select RGB Scart 21-Pin video input through RGB IN 1 / OUT terminal, see the "COMPUTER INPUT (RGB Scart 21-Pin Video Input)" on page 22. INPUT button Computer 1 ✽ Computer 2 Video ✽ Computer 1 is not displayed when RGB IN 1/ OUT terminal is used as MONITOR OUT. MENU OPERATION 1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button to move the red frame pointer to the INPUT Menu icon. 2 Press the POINT DOWN button to move the red arrow pointer to Video and then press the SET button. The Source Select Menu will appear. 3 Move the pointer to the source that you want to select and then press the SET button. INPUT MENU VIDEO Move the pointer to Video and press the SET button. Auto When selecting Auto, the projector automatically detects the incoming video signal, and adjusts itself to optimize its performance. The projector selects the connection in the following order: 1st Y-Pb/Cb-Pr/Cr 2nd S-VIDEO 3rd VIDEO Y-Pb/Cb-Pr/Cr has priority over S-VIDEO. S-VIDEO has priority over VIDEO. Video When the video input signal is connected to VIDEO/Y jack, select Video. S-Video When the video input signal is connected to S-VIDEO jack, select S-Video. Y,Pb/Cb,Pr/Cr When the video input signal is connected to VIDEO/Y-Pb/Cb-Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr. Source Select Menu (VIDEO) Move the pointer to the source and press the SET button. ✽ Computer 1 is not displayed when RGB IN 1/ OUT terminal is used as MONITOR OUT. 31