Canon LV-5200 Owners Manual - Page 36
Setting
![]() |
View all Canon LV-5200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
SETTING SETTING MENU 1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button(s) to move the red frame pointer to the SETTING icon. 2 Press the POINT DOWN button to move the red frame pointer to the item that you want to set and then press the SET button. The setting dialog box appears. SETTING MENU Set the pointer to the item and press the SET button. SETTING Menu icon Language The language used in the ON-SCREEN MENU is available in English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Russian, Chinese, Korean, and Japanese. Keystone This function corrects the distorted image. Select either Store or Reset, and then press the SET button. The keystone dialog box appears. (Refer to page 20.) Store ···· stores the keystone adjustment data when the AC Power Cord is disconnected. Reset ···· resets the keystone adjustment data when the AC Power Cord is disconnected. Blue back When this function is "On," the projector produces a blue image while the input signal is not detected. When pressing the SET button at Language, the Language Menu appears. Display This function decides whether to display the On-Screen Displays. On ··· shows all the On-Screen Displays. Off ···· sets the On-Screen Displays disappeared except; G ON-SCREEN MENU G "Power off?" message G P-TIMER G "No signal" message G "Wait a moment!" message Logo When this function is "On," the projector displays our logo when starting up. Move the pointer to the item and then press the POINT LEFT/RIGHT button(s). Ceiling function Ceiling When this function is "On," the picture is top / bottom and left / right reversed. This function is used to project the image from a ceiling mounted projector. Rear function Rear When this function is "On," the picture is left / right reversed. This function is used to project the image to a rear projection screen. Terminal RGB IN 1 / OUT terminal on the back of the projector can be used as computer input or monitor output by switching with the POINT LEFT/RIGHT button. (See the right Note.) To use the terminal as computer input, select Computer 1. To use the terminal as monitor out, select Monitor out. NOTE G This Terminal item cannot be selected when the input source is selected as "Computer 1" in the "SELECTING THE INPUT SOURCE" (P22). 36
![](/manual_guide/products/canon-lv5200-owners-manual-7ee5cb3/36.png)