Canon LV-5200 Owners Manual - Page 27

COMPUTER INPUT Display area Selects the area displayed with this projector. Select the resolution at the display area dialog box. Display area H Adjustment of the horizontal area displayed with this projector. Press the POINT LEFT/RIGHT button(s) to decrease/increase the value. Press the SET button at the Display area icon and the display area dialog box appears. Display area Display area V Adjustment of the vertical area displayed with this projector. Press the POINT LEFT/RIGHT button(s) to decrease/increase the value. Full screen Press the POINT LEFT/RIGHT button(s) to turn the Full screen function "On" or "Off." Set "On" to resize the image with 4 x 3 aspect ratio to fit the screen. NOTE : Full screen cannot be selected after Display area, Display area H, and Display area V are adjusted. Press the POINT LEFT /RIGHT button(s) to adjust the value. 3 Store To store the adjustment parameters, move the red frame pointer to the Store icon and then press the SET button. Move the red arrow pointer to any of Mode 1 to 5 that you want to store and then press the SET button. To store the adjustment data. This Mode has parameters being stored. Mode free To clear the adjustment parameters previously set, move the red frame pointer to the Mode free icon and then the SET button. Move the red arrow pointer to the Mode that you want to clear and then press the SET button. Other icons operate as follows. Reset Reset all adjustment parameters on the adjustment dialog box to the previous figure. Vacant Mode Shows the values of "Total dots," "Horizontal," "Vertical," "Display area H," and "Display area V." To clear the adjustment data. Quit Closes the PC ADJUST Menu. NOTE G Fine sync, Total dots, Display area (H/V) and Full screen cannot be adjusted when "1035i (HDTV)" or "1080i (HDTV)" is selected on PC SYSTEM Menu (P23). Close this dialog box. 27