Canon PC400 Service Manual - Page 131
cartridge slowly until it stops., label facing left, and slide in
View all Canon PC400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Step Work 7 Hold the cartridge with its Warning label facing up, and rotate it in both directions about 90°. 8 Place the cartridge on a level place; then, detach the tip of the seal, and pull it fully out (about 50 cm). 9 Hold the cartridge with its Warning label facing left, and slide in the cartridge slowly until it stops. 10 Close the top cover, and return it to the center. CHAPTER 8 INSTALLATION Description COPYRIGHT © 1998 CANON INC. CANON PC400/420/430,FC200/220 REV.0 JAN.1998 PRINTED IN JAPAN (IMPRIME AU JAPON) 8-3
COPYRIGHT © 1998 CANON INC.
CANON PC400/420/430,FC200/220 REV.0 JAN.1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 8 INSTALLATION
8-3
Step
Work
Description
Place the cartridge on a level place;
then, detach the tip of the seal, and pull
it fully out (about 50 cm).
8
Hold the cartridge with its Warning
label facing left, and slide in the
cartridge slowly until it stops.
9
Close the top cover, and return it to the
center.
10
Hold the cartridge with its Warning
label facing up, and rotate it in both
directions about 90°.
7