Canon PIXMA MG6620 User Manual - Page 240

Note • You cannot change this setting with the memory card inserted in the card slot. ◦ WSD setting Setting items when you use WSD (one of the network protocols supported in Windows 8.1, Windows 8, Windows 7, and Windows Vista). Enable/disable WSD Selects whether WSD is enabled or disabled. Note • When this setting is enabled, the printer icon is displayed on the Network Explorer in Windows 8.1, Windows 8, Windows 7 and Windows Vista. WSD scan from this device Selecting Enable allows you to transfer the scanned data to the computer using WSD. Timeout setting Specifies the timeout length. ◦ Bonjour settings Setting items for LAN using Bonjour for Mac OS. Enable/disable Bonjour Selecting Enable allows you to use Bonjour to perform the network settings. Service name Specifies the Bonjour service name. You can use up to 48 characters for the name. Note • You cannot use the same service name as that already used for other LAN connected devices. ◦ LPR protocol setting Activates/deactivates the LPR setting. ◦ PictBridge communication Setting items for printing from a PictBridge (Wireless LAN) compliant device. Enable/disable communication Selecting Enable allows you to print from a PictBridge (Wireless LAN) compliant device. Timeout setting Specifies the timeout length. ◦ Wireless LAN DRX setting Selecting Enable allows you to activate discontinuous reception when using wireless LAN. It allows you to save electricity. Note • Depending on the access point you are using, discontinuous reception may not be activated even though Enable is selected. • Discontinuous reception is activated only while the machine is on standby. (The touch screen is in the screen saver mode.) 240