Canon PIXMA MG6620 User Manual - Page 566
Cannot Communicate with the Machine Using the Access Point Mode
View all Canon PIXMA MG6620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 566 highlights
Check10 Make sure that the firewall of the security software is disabled. If the firewall function of your security software is turned on, a message may appear warning that Canon software is attempting to access the network. If the warning message appears, set the security software to always allow access. If using any programs that switch the network environment, check their settings. Some programs will enable a firewall by default. Check11 When using a router, connect the machine and computer to the LAN side (same network segment). Check12 When the machine is connected to an AirPort Base Station via a LAN, use alphanumeric characters for the name of the network (SSID). If the problem is not resolved, perform setup according to the instructions on our website. • For placement: Make sure that there is no barrier or obstacle between the access point and the machine. Cannot Communicate with the Machine Using the Access Point Mode Check1 Make sure that the machine is turned on. Check2 Is Change LAN in LAN settings under Device settings set to Disable LAN or Wireless LAN active? Select Access point mode active. Check3 Is the machine selected to connect external communication devices (e.g. computers, smartphones, or tablets)? Select an access point name (SSID) specified for the machine as a destination for external communication devices. Check4 Enter a password if you specify it for the machine. Check5 Make sure that external communication devices are not placed far away from the machine. Do not locate external communication devices too far away from the machine. Check6 Make sure that there is no obstruction. Wireless communication between different rooms or floors is generally poor. Adjust the location of the devices. Check7 Make sure that there is no source of radio wave interference in your vicinity. If a device (e.g. microwave oven) using the same frequency bandwidth as the wireless station is placed nearby, the device may cause interference. Place the wireless station as far away from the interference source as possible. Check8 Are you trying to connect 6 devices or more? 566