Canon PIXMA MG6620 User Manual - Page 588

1. Open the Utilities folder in the Applications folder. 2. Start Network Utility. 3. Click the Ping button. 4. Make sure that Send only XX pings (XX are numbers) is selected. 5. Enter the IP address of the target machine or the target access point in Enter the network address to ping.. 6. Click Ping. "XXX.XXX.XXX.XXX" is the IP address of the target device. A message such as the following is displayed. 64 bytes from XXX.XXX.XXX.XXX: icmp_seq=0 ttl=64 time=3.394 ms 64 bytes from XXX.XXX.XXX.XXX: icmp_seq=1 ttl=64 time=1.786 ms 64 bytes from XXX.XXX.XXX.XXX: icmp_seq=2 ttl=64 time=1.739 ms --- XXX.XXX.XXX.XXX ping statistics --3 packets transmitted, 3 packets received, 0% packet loss If the packet loss is 100%, the communication is not available. Otherwise, the computer is communicating with the target device. Checking the Network Setting Information To check the network setting information of the machine, display the network setting information using the operation panel of the machine or print out the network setting information of the machine. LAN settings Printing Out Network Setting Information 588