Canon PowerShot S30 PowerShot S40/S30 Camera User Guide - Page 110
Single Images, All the Images on a CF Card
View all Canon PowerShot S30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Selecting Images for Printing (continued) 3 Select images for printing. Single Images • When the print type (p. 99) is set to [Standard] or [Both], select an image using B or A on the multicontroller. You can set the number of copies (up to 99) to be printed using C or D on the multicontroller. Number of Copies • When the print type (p. 99) is set to [Index], select an image using B or A on the multicontroller and mark or remove marks from images using C or D on the multicontroller. • You can use the same procedures to select images in index replay (3 images). Press the button to switch between single replay and index replay. All the Images on a CF Card • Press the button to switch to index replay (three images). • You can set one copy of each image to print by pressing , then selecting [Mark All] using C or D on the multicontroller, and pressing again. • When the print type is set to [Standard] or [Both], the setting for the number of print copies can be changed for each image. When [Index] is selected, the print settings can be deleted. For the instructions on changing settings, please reread Step 3 from the beginning. • You can cancel all the settings by selecting [Clear all]. 4 Press the button. • The selection mode will turn off and the Print Order menu will reappear. • Images are printed in order from oldest to newest by the shooting date. • A maximum of 998 images can be marked per CF card. • When [Print Type] is set to [Both], the number of copies can be set. When it is set to [Index], the number of copies cannot be set (only one copy will be printed). • Print settings can also be assigned to images with the supplied software programs on a computer. 108 Print Settings (DPOF Print Settings)