Canon PowerShot S30 PowerShot S40/S30 Camera User Guide - Page 123

Printing with the Direct Print Compatible Bubble Jet Printer (Optional) By connecting the Direct Print compatible Bubble Jet Printer* (optional) to the camera, you can print images very easily directly from the camera. It can also be used with the DPOF print settings. * Not sold in some regions To find out if your Bubble Jet Printer supports the direct print function, or for general information about Bubble Jet Printers or connection cables, please also refer to the Quick Start Guide supplied with your Bubble Jet Printer. Connecting Bubble Jet Printer to the Camera Be sure to turn off the camera before connecting to Bubble Jet Printer. • You are recommended to use a household power supply to power the camera when it is connected to the printer. If you are using a battery pack, ensure that it is fully charged. The printing may stop if the camera battery is discharged even if it is not complete; therefore, early replacement of the low battery with a fully charged one is recommended. 1 Connect the camera and printer using the cable. • When you insert the cable, make sure the To Bubble Jet Printer "Canon" logo on the cable faces the front of the camera (lens side). DIGITAL Bubble Jet Printer Terminal digital camera connection cable 2 Slide the power/replay lever to the right to turn on the camera. • appears on the camera LCD monitor and the power/mode indicator is lit green when the printer is properly connected to the camera. Printing with the Direct Print Compatible Bubble Jet Printer (Optional) 121