Canon PowerShot S30 PowerShot S40/S30 Camera User Guide - Page 17

Preparing the Camera Charging the Battery Pack Recharge Battery Pack NB-2L (supplied) with Battery Charger CB-2LT or CB-2LTE before you use the camera for the first time and subsequently when the "Charge the battery pack" message is displayed. 1 Align the edge of the battery pack with the line on the battery charger, then slide the battery in the direction of the arrow. 2 Battery charger model names and types vary by region. (For CB-2LT) Plug the battery charger into an electrical outlet. CB-2LT Charging Indicator (For CB-2LTE) Attach the power cord to the battery charger and plug it into an electrical outlet. (For CB-2LT and CB-2LTE) • The charging indicator will shine orange while the battery pack is charging. It will change to a steady green when the charge is complete. • After charging, unplug the battery charger and CB-2LTE Charging Indicator remove the battery pack from it. • To protect and prolong the life of the battery pack, do not charge it for 24 hours or longer at a time. • This is a lithium ion battery pack so there is no need to completely use or discharge it before recharging. It can be recharged at any time. • It takes approximately 80 minutes to bring a fully discharged battery pack to full charge (based on standard Canon testing criteria). Charge it within a temperature range of 5 to 40º C (32 to 104º F). • Charging times will vary according to the surrounding humidity and battery pack charge state. • You may hear a noise during charging. This is not a malfunction. Preparing the Camera 15