Canon PowerShot S30 PowerShot S40/S30 Camera User Guide - Page 30
Turning the Power On / Off continued, Power Save Function
View all Canon PowerShot S30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Turning the Power On / Off (continued) • You will hear a startup sound and see the startup image when the power comes on. (To change the startup sound and image, see below and pages 41 and 139.) • The startup image does not appear when the LCD monitor is off or the terminal is connected to a TV. Turning on the camera without the startup sound and image Press and hold the button, then turn on the power. Power Save Function The camera is equipped with a power save function. If [Auto Power Down] is set to [Off], the power goes off according to the following conditions. Shooting Mode: Powers down approximately three minutes after the last time a camera control is accessed. The LCD monitor will shut off approximately three minutes after the last time a camera control is accessed even if the power save function is turned off. Replaying Mode: Powers down approximately five minutes after the last time a camera control is accessed. Printer Connection Mode: Powers down approximately five minutes after the last time a camera control is accessed on the camera or something is printed on the printer. PC Connection Mode: Displays a warning message on the computer screen approximately 5 minutes after a control is last accessed. The camera will power down if no controls are used after 1 additional minute. It will not activate when the camera is powered from a household power source. • The following are the ways to restore the power. - If the power save function is activated while the camera is in Shooting mode, press the shutter button halfway. - If the power save function is activated while the camera is in Replaying mode, slide the power/replay lever to the right again. • Please note that the camera continues to consume a minimal amount of power even when the power save function shuts it down. • The power save function is disabled while a slide show plays on the camera (p. 99). • You can turn off the power save function in the [ (Set up)] menu (p. 138). 28 Basic Functions