Canon REALiS LCOS SX80 Mark II Multimedia Projector SX80 MarkII/SX800 Users Ma - Page 108
Extending the Menu Display Time, Setting a Password, Normal] is the factory default.
View all Canon REALiS LCOS SX80 Mark II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Setting Various Function Extending the Menu Display Time [Other settings] - [Menu display time] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO/S-VIDEO USB System settings Other settings Menu display time You can extend the menu display time, which is 30 seconds usually, to 3 minutes. Setting a Password [Other settings] - [Password settings] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO/S-VIDEO USB System settings Other settings Password settings Disables the projector unless the correct password is entered. Normal The menu is displayed for 30 seconds. Extended The menu is displayed for 3 minutes. Press the OK button to accept your setting and then press the MENU button. • [Normal] is the factory default. • You cannot extend the display time for the window indicating the completion of Auto setup (P53), the guide window (P106), the lamp replacement window (preparation) (P145), or the lamp replacement window (warning) (P145). • You cannot use the button holding operation except when you adjust the image size (P58) or focus (P59). Off The projector can be used even if no password is entered. On The projector cannot be used unless you enter your password. Press the OK button to accept your setting and then press the MENU button. • [Off] is the factory default. • You cannot set [On] unless you have com- pleted [Register password]. Once you set a password, the password entry screen appears at power-on. Enter a 4-digit password with If the password is valid, the projection starts. If you enter a wrong passwords three times, the power will be turned off. • The power is also turned off if no password is inputted for 3 minutes. To Cancel the Password Turn off the projector and unplug the power plug. Hold down the MENU button on the top control and connect the power plug. Make sure to keep holding down the MENU button until a beep sounds. The password is cancelled (the registered password is also reset). < < 108