Canon REALiS WUX6010 Pro AV User Manual - Page 103

Advanced Guide Menu Description Submenu Menu Description Function Correct image distortion by aligning corners of the blending area with the image from the reference projector. For multi-projection alignment, align the corners with the projector blending area (already adjusted) that forms the basis. Points to adjust Blending area Corner adjustment Left, Right, Top, Bottom Select the direction of the blending area to adjust. As you reposition the corners of the selected area, the overall image changes to match the adjustment. • Sides set to an edge-blending width of 12 or more can be adjusted when [Keystone] is set to [Corner adjustment] and the aspect ratio is [16:10]. • To reset adjustment, use [Keystone] (P69). Lens - Position > [Install settings] > [Lens - Position] The projector can save information about the lens position in memory. Up to three sets of lens information (including focus, zoom, and lens shift settings) can be saved, and the lens can be restored to these positions. Submenu Load position 1-3 Save position 1-3 Lens shift reset Function Restores the lens to the positions saved using Save position 1-3. Saves the lens position as positions 1-3. Restores the lens to the original position. • To lock (protect) the saved position, set [Positional lock] (P96) to [On]. • The values of the following settings are saved in addition to the lens position information: - Horizontal/vertical keystone / corner adjustment - Screen color - Screen aspect - Zoom - Digital image shift 103