Canon REALiS WUX6010 Pro AV User Manual - Page 63
Step 4 Select an Aspect Ratio (Screen Aspect) Matching the Screen, Selecting Screen Aspect
View all Canon REALiS WUX6010 Pro AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Basic Guide Projection Procedure Projection Procedure Step 4 Select an Aspect Ratio (Screen Aspect) Matching the Screen Select an optimum aspect ratio of the projected image (screen aspect) or an optimum screen mode (aspect) according to the aspect ratio of the screen, type of input image signal and so on for the projection to make best use of the screen size. [Screen aspect] [Aspect] Select the same screen aspect ratio as the screen you are using. In general, select [Auto]. You may need to change the setting depending on the resolution of the computer or other AV equipment connected. If the image is not projected with the desired aspect ratio, refer to "Relationship between Aspect and Screen Aspect" on page 175. Selecting Screen Aspect Select the correct aspect ratio for the screen which is used. 1 Press the MENU button to display the menu window. Remote control Projector 2 Press the [ ] / [ ] buttons to select the [Install settings] tab. Remote control Projector When the Short Fixed Lens is attached and if the projected image does not fit on the screen, you can display the image by electronically reducing its size. The [Zoom] setting will appear in the menu only when the Short Fixed Lens (RS-IL03WF) is attached. 63