Canon REALiS WUX6010 Pro AV User Manual - Page 158
Corner Adjustment, Select a point to adjust, and move it so that the image as a whole looks
View all Canon REALiS WUX6010 Pro AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Advanced Projection 6 Readjust the black level of area B, as needed. • To reduce distracting colors and colors that are out of alignment in areas where the images overlap, perform [Color blending adjustment] targeting the main tone in the envisaged projected image. If you perform adjustments using [Color blending adjustment] or other menus, that may not eliminate the distracting colors and differences in brightness in areas where the images overlap. Blending can be fine-tuned by adjusting [Adjustment type] > [Black level] > [Red], [Green], and [Blue]. ■ Corner Adjustment Projected images from multiple projectors used in overlapping projection must be precisely repositioned. Positions of each corner in the blending area can be aligned with the blending area of the reference projector. • First, complete [Side] adjustment as described in "Basic Instructions" (P154). • Sides set to an edge-blending width of 12 or more can be adjusted when [Keystone] is set to [Corner adjustment] and the aspect ratio is [16:10]. • To reset adjustment, use [Keystone] (P97). • A small edge-blending width may limit the amount of adjustment available. 1 On the reference projector, configure keystone (P97) and edge-blending (P100) settings, and then set the edge-blending markers to [On] (P155). 2 In the [Install settings] menu, select [Professional settings] > [Edge blending] > [Adjust] > [Corner adjustment]. 3 Select a point to adjust, and move it so that the image as a whole looks symmetrical. 158