Canon REALiS WUX6010 Pro AV User Manual - Page 71
Selecting an Image Mode, Step 7 Turn the Projector Off
View all Canon REALiS WUX6010 Pro AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Basic Guide Projection Procedure Projection Procedure ■ Selecting an Image Mode Press the IMAGE button on the remote control to select. The image mode changes each time the IMAGE button is pressed. (The displayed image modes vary depending on the selected input signal.) Remote control You can also select any image mode from the [Image mode] menu. (P88) • User settings 1 - 5 are displayed when the desired image settings have been created and stored using the user memory function in the image adjustment menu. (P88) Step 7 Turn the Projector Off 1 Press the POWER button to display the window shown below. Remote control Projector 2 When this window is displayed, press the POWER button again to turn off the power. After you turn the power off, the projector will enter standby mode once it cools down. If you want to continue projecting without turning off the power, press a button other than POWER, or else wait until the confirmation message disappears. • After turning off the projector, wait at least 5 minutes before turning it on again. It may shorten the lamp life if you turn on the projector immediately after turning it off. • Using the projector for extended periods may shorten the life of the lamp and internal optical components. • Unplug the projector if it will not be used for an extended period. 71