Canon REALiS WUX6010 Pro AV User Manual - Page 174
Removing the Lens Unit, the sleeve.
View all Canon REALiS WUX6010 Pro AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
Maintenance ■ Removing the Lens Unit 1 Perform steps 1 to 5 of "Installing the Lens Unit" (P170 - P172) to remove the sleeve. 2 Disconnect the lens cable from the lens connector. When pulling out (disconnecting) the lens cable, press the buttons on both sides of the lens cable connector while pulling out the cable. 3 Fix the lens cable as shown in the illustration and loosen the 4 screws to remove the lens unit. The 4 lens unit screws are attached to the lens unit and cannot be removed. 174
Maintenance
174
■
Removing the Lens Unit
1
Perform steps 1 to 5 of “Installing the Lens Unit” (
P170
–
P172
) to remove
the sleeve.
2
Disconnect the lens cable from the lens connector.
3
Fix the lens cable as shown in the illustration and loosen the 4 screws to
remove the lens unit.
The 4 lens unit screws are attached to the lens unit and cannot be removed.
When pulling out (disconnecting) the lens cable, press the buttons on both sides of the
lens cable connector while pulling out the cable.