Canon UHD DIGISUPER 90 manual for UJ27x6.5B - Page 118

Operation example initialize operation setting, Setting the auto iris gain, Lens code setting

Get Canon UHD DIGISUPER 90 PDF manuals and user guides View all Canon UHD DIGISUPER 90 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 118 highlights

Operation example (initialize operation setting) Set whether or not to execute the zoom and focus initialization upon power on. Top screen × 4, Info screen × 3 IG Setting the auto iris gain Top screen *1 (flashing) to adjust*2 (to set to "51") *3 CODE Lens code setting Give a number (code) to the lens, and the given number (code) can be sent to the camera side. Any of 16 different codes from 0000 to 1111 in binary format can be selected. Although it depends on the camera's functions, these codes are sometimes used to differentiate between the lenses at the camera side. Set these codes when instructed to do so by the camera manufacturer. Top screen (to set zoom) to select *(Note 1): *(Note 2): *(Note 3): When adjusting the gain while checking the iris operation, set the camera's iris mode to [AUTO]. Set in such a way that the maximum gain is obtained within the range where hunting will not occur. The iris gain setting is not reset even when the steps described in "Reset operation" on page E1 are taken. For information on setting the auto iris gain using a trimmer, refer to "2-4 Iris Gain Adjustment" on page E8 in the Operation Manual. Selection item Function 01 - 99 Minimum gain Maximum gain Default value: 50 Turn the power off then on. Selection item Function (D) OFF Initialization operation not performed ON Initialization operation performed (D): Default value E4 (flashing) to adjust (to set to "0001") *(Note) • The code has a binary format, and it comes in 16 variations. • The lens code remains unchanged even after the resetting operation has been performed. Selection item 0000 - 1111 Default value: This is set at the factory prior to shipment.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
E4
Operation example (initialize operation setting)
Set whether or not to execute the zoom and focus initialization upon power on.
Top screen
× 4,
Info screen
× 3
(to set zoom)
to select
Turn the power off then on.
Selection item
(D)
OFF
ON
Function
Initialization operation not
performed
Initialization operation
performed
(D): Default value
IG
Setting the auto iris gain
Top screen
*
1
(flashing)
to adjust*
2
(to set to “51”)
*
3
*(Note 1):
When adjusting the gain while checking the iris operation, set the camera’s
iris mode to [AUTO].
*(Note 2):
Set in such a way that the maximum gain is obtained within the range where
hunting will not occur.
*(Note 3):
The iris gain setting is not reset even when the steps described in “Reset
operation” on page E1 are taken.
For information on setting the auto iris gain using a trimmer,
refer to “2-4 Iris Gain Adjustment” on page E8 in the Operation
Manual.
Selection item
01
–
99
Function
Minimum gain
Maximum gain
Default value: 50
CODE
Lens code setting
Give a number (code) to the lens, and the given number (code)
can be sent to the camera side. Any of 16 different codes from
0000 to 1111 in binary format can be selected.
Although it depends on the camera’s functions, these codes
are sometimes used to differentiate between the lenses at the
camera side.
Set these codes when instructed to do so by the camera
manufacturer.
Top screen
(flashing)
to adjust
(to set to “0001”)
*(Note)
• The code has a binary format, and it comes in 16 variations.
• The lens code remains unchanged even after the resetting
operation has been performed.
Selection item
0000
–
1111
Default value: This is set at the factory prior to shipment.