Canon UHD DIGISUPER 90 manual for UJ27x6.5B - Page 44

1 HOW TO MOUNT 1-3 Mounting the Accessories for Semiservo Operation The zoom servo demand and the flexible focus control unit are mounted and connected as shown in the figure below. When mounting the various demands, refer to the operation manual for the respective demand. 1-4 Mounting the Accessories for Manual Control System Mount and connect the flexible zoom and focus control units as shown in the figure. When mounting the various demands, refer to the operation manual for the respective demand. ᶃ Flexible module ᶄ Flexible focus control unit ᶅ Servo module ᶆ Zoom servo demand ᶇ Flexible cable ᶈ Demand cable ᶃ Flexible module ᶄ Flexible zoom control unit ᶅ Flexible focus control unit ᶆ Flexible cable ᶇ Switch box unit Mounting the flexible module It is necessary to mount the flexible module to the zoom and focus couplings located in the bottom compartment of the lens. * (NOTE) The same flexible module is used for both zoom and focus couplings. So, it can be mounted on either the zoom or focus coupling. 1 Before mounting the module to the lens, turn the lock screw of the module counterclockwise until the lock axis comes out to its a half way of length. 2 Press the module in the direction of arrow "A", so that the key pins on the lens are inserted in the key grooves of the module. 3 Mate the coupling A of the module with the coupling B of the lens. And then, fully push the module in the direction of arrow "B" until it stops. E6