Canon UHD DIGISUPER 90 manual for UJ27x6.5B - Page 126
Adjusting the Camera Fol Voltage
View all Canon UHD DIGISUPER 90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Info - Adjust - Camera Fol Adjusting the Camera Fol Voltage Iris Zoom Focus The voltages sent back from the lens to the camera can be changed when it is necessary to change the lens side according to the situation on the camera side (indicators, etc.). A password is required, so please contact the distributing agent or Canon Inc. Top screen × 4, Info screen to select*1 × 5 to adjust*2 Adjust screen Camera Fol screen to set the iris voltage to set the zoom voltage to set the focus voltage EnterPassword screen Enter the password Press the DISPLAY switch to store the data. *(Note 1): *(Note 2): The data of the selected item is displayed. When this operation is performed for the first time, the factory default settings at the time of shipment will be displayed. These are the values that have been adjusted to each individual lens. Make a note of them in case they are to be restored. The numerical value is a relative value display. Please note that making a radical change from the original value has the possibility to influence other equipment even though it possible to select from -32760 to 32760. *(Note) • The factory default settings at the time of shipment will not be restored even when the reset operation is performed. • The password is invalid when the power is turned off. • Perform password character input by locating the characters using the up and down buttons, and moving from one character to another or making corrections using the left and right buttons. Selection item Selection range Iris F2.8 F16 Zoom Wide Tele -32760-( 0 )-32760 Focus Near Far Reference: The numerical values in parentheses are the reference values for the factory defaults at the time of shipment. E12