Canon VB-S800D User Manual - Page 104
Setting Event Operations [Event] tab, Setting Detection Areas, Event] tab
View all Canon VB-S800D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Important It is recommended that the detection criteria are set in a condition as close as possible to the condition in which the camera is actually used. Perform a detection test in advance to make sure that the detection frame continues to be displayed for a subject targeted for passing detection. Setting Event Operations ([Event] tab) Set operations to be performed upon detection of changes in a subject. [Event] tab [External Device Output for OFF Event] checkbox Select this checkbox for enabling external device output at an OFF event and select operation (active or inactive). Setting Detection Areas Set detection areas in the video display area. Setting a [Rectangular] detection area A rectangle is shown in the video display area. Move or resize that rectangle to set a detection area. (1) (2) (3) (1) Specify the operation timing. (Multiple checkboxes can be selected.) [ON Event Operation] checkbox When selected, the operations set in (2) [E-mail Notification] and [Video Record] are performed the moment detected mode is triggered to ON. [OFF Event Operation] checkbox When selected, the operations set in (2) [E-mail Notification] and [Video Record] are performed the moment detected mode is triggered to OFF. [Detected mode Operation] checkbox When selected, the operations set in (2) [E-mail Notification] and [Video Record] are performed for as long as detected mode is active. (2) Specify the event operation. (Multiple checkboxes can be selected.) [E-mail Notification] checkbox When selected, e-mail notification is performed at the timing set in (1). [E-mail Notification] must be set in advance under [Upload] in the Setting page (p. 53). [Video Record] checkbox When selected, video record is performed at the timing set in (1). [Video Record Action] must be set in advance under [Event] in the Setting page (p. 56). (3) Operation of External Device Output [External Device Output for ON Event] checkbox Select this checkbox for enabling external device output at an ON event and select operation (active or inactive). Setting a [Polygonal] detection area Specify polygonal areas with a maximum of 32 angles. Click in the video display area to form the polygon point by point. Click on a previously set point to complete the polygon and set the enclosed area as the detection area. The set area can also be moved by dragging it. Setting a detection area using [Quick setting] [Quick setting] can be configured for [Removed Object Detection] only. 1 Temporarily remove the object whose removal you want to detect from the video display area. 2 Click [Restart intelligent function]. The background video is created. 3 Replace the object whose removal you want to detect in its original position. 104