Canon VB-S800D User Manual - Page 160
keep pushing the reset switch for 5 seconds or more., 800D, attach the top
View all Canon VB-S800D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
3 Turn on the power while pushing the reset switch, and keep pushing the reset switch for 5 seconds or more. The reset switch is located in a recessed area. Push the switch using the tip of a slender object such as a clip. All settings of the camera, except for the date and time, are restored to factory default settings. Important If the reset switch is pushed, network-related settings will also be restored to factory default settings including the camera's IP address, subnet mask, default gateway address, etc. Accordingly, you can no longer operate the camera from the computer you were using to connect to the camera before. When initializing the camera, use the "VB Initial Setting Tool" installed in your computer to set an IP address appropriate for the environment in which the camera is used (See "Performing Initial Settings for the Camera" (p. 28)). 4 For VB-S30D/VB-S31D/VB-S800D, attach the top cover. For top cover attachment, see the "Installation Guide" included with the camera. Reset Switch Reset Switch 160