Canon VB-S800D User Manual - Page 74
[Camera Angle] Digital Zoom Settings, Setting the Exposure Compensation
View all Canon VB-S800D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
[Camera Angle] Digital Zoom Settings The following can be set here. • Zoom operations Operate the digital zoom function. • Image Flip Flip the video image vertically. • Control for Admin Set the exposure compensation. (1) (2) (3) (4) (5) (6) (8) (7) (1) Video Display Area Displays video currently captured by the camera. (2) [Resize] button Each time this button is clicked, the screen size of the video display area switches between "480 x 270" and "960 x 540". (3) [Reconnect] button The camera is reconnected. (4) [Zoom] slider, [Zoom] buttons These control the digital zoom ratio. The [Zoom] slider zooms in (telephoto) by moving the knob upwards or zooms out (wide-angle) by moving the knob downwards. The [Zoom] buttons zoom in or out continuously while pressed, and stop when released. (5) [Control for Admin] button This button displays the [Exposure Compensation] slider. (6) [Image Flip] selection box Select the orientation of the camera video. If [Enable] is selected, the video is displayed rotated by 180 degrees. (7) [Save settings] Save the current zoom and [Image Flip] settings in the camera. If the zoom or [Image Flip] settings have been changed, be sure to save the settings in the camera using the [Save settings] button. (8) [Restore settings] Discard the settings you have specified and restore the settings saved in the camera. Note • [Camera Angle] can be operated from the Setting menu only on the VB-S800D/VB-S900F. It cannot be operated from Admin Viewer or VB Viewer. • Connecting to the camera from the [Camera Angle] menu will disconnect connections from each type of viewer and recording software that are not connected via RTP. • The higher the digital zoom ratio, the lower the video quality becomes. • Revise the following settings after saving the [Camera Angle] settings. - Privacy mask settings - Preset settings - Intelligent function settings • [Camera Angle] supports connection to a single camera for up to 30 minutes. Setting the Exposure Compensation You can set any of nine levels of video brightness. To darken the video, drag the slider toward [Dark]. To brighten the video, drag the slider toward [Bright]. Note • The exposure compensation value set by [Camera Angle] is not reflected under [Camera] > [Initial Camera Settings] > [Exposure Compensation] (p. 42). • After [Exposure] is set to [Manual] and adjusted in Admin Viewer (p. 135), [Exposure] is automatically reset to [Auto]. 74