Canon VB-S800D User Manual - Page 64
HMAC_SHA1_96] or [HMAC_MD5_96] was selected
View all Canon VB-S800D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
identifying the SA, be careful not to specify an inbound SPI whose value is already used in the SPI for other ESP. z If [Security Protocol] was set to [AH] or [ESP and AH] in (5), (16) [SA AH Authentication Algorithm] to (20) [SA AH SPI (inbound)] must be set. (16)[SA AH Authentication Algorithm] Set the AH authentication algorithm to [HMAC_SHA1_96] or [HMAC_MD5_96] according to the authentication algorithm supported by the device to connect to. (17)[SA AH Authentication Key (outbound)] Set the SA authentication key for outbound. If [HMAC_SHA1_96] or [HMAC_MD5_96] was selected in (16), set a 160-bit or 128-bit hexadecimal, respectively. (18)[SA AH SPI (outbound)] Set the SA SPI value for outbound. Set a desired value in the range of 256 to 4294967295. (19)[SA AH Authentication Key (inbound)] Set the SA authentication key for inbound. If [HMAC_SHA1_96] or [HMAC_MD5_96] was selected in (16), set a 160-bit or 128-bit hexadecimal, respectively. (20)[SA AH SPI (inbound)] Set the SA SPI value for inbound. Set a desired value in the range of 256 to 4294967295. Since this setting is used as an ID for identifying the SA, be careful not to specify an inbound SPI whose value is already used in the SPI for another AH. Important • To run this camera with IPsec, the communicating devices and network must be set beforehand. Contact your System Administrator for these settings. • When connecting with IPsec, set the camera IP address manually. For IPv4 addresses, use addresses set with [Network] > [IPv4 Address Setting Method] > [Manual]. For IPv6 addresses, use addresses set with [Network] > [IPv6 Address (Manual)]. • If any setting is changed from the [IPsec] menu, the camera may become inaccessible from the active web browser. Check beforehand the precautions in "Important" in "[Reboot Item] Setting Items Requiring Rebooting" (p. 72). Note If IPsec is used, video transmission performance drops. 64