Canon Vb-C60 Network Video Recorder VK-64/VK-16 Administrator's Manual - Page 101

Register Camera Server and Set Recording Schedule Register Camera Server Configure External Device Input To switch On or Off the external device input, check the [Invert the state of the following external] option. One or more inputs may be shown depending on the type of the Camera Server. It is not necessary to change this setting if it is not required. Assign a location and zone 1. If multiple [Cam] tabs are shown to the right of the screen, select a tab for the Camera Server to edit settings. 2. Change the name of the Camera Server in the [Camera Name] field as required. Note z Enter the [Camera Name] in up to 15 characters. z Changing the [Camera Name] setting here does not change the camera name of the Camera Server. 3. In the [Location] field, select a location for the Camera Server from the drop-down menu. 4. In the [Zone] field, select a zone for the Camera Server from the drop-down menu. If necessary, click [Add] to add another Location or Zone. The [Add Location] or [Add Zone] dialog opens. Enter the [Location Name] or [Zone Name] and click [OK]. When you add a Zone in the [Add Zone] dialog, you should also add it to a Location in the same dialog. Select a location from the drop-down menu. See P. 4-12 for how to add locations and zones. 4-21