Canon Vb-C60 Network Video Recorder VK-64/VK-16 Administrator's Manual - Page 264

Messages List Messages This camera server has already been set up without recording. Please check your settings and try again. Adding/Editing a Camera Server Connection to the camera server could not be established. Please verify that the host name or IP address, user name, and password are correct. The storage server of this version does not support the specified camera. Cause When a camera server configured as [Do not record] is already added, an attempt was made to add or edit a camera server using the same hot name/IP address and port number. Could not connect to the camera server. You attempted to register VB-C500VD, VB-C500D, VB-C60 or VB-C300 with an older version of the Storage Server. Add/Edit Camera Server dialog, Add/Edit Recording Schedule dialog, Motion Detection Settings dialog, Sensor Event Settings dialog Connection to the camera server has been lost. Failed to connect a camera server. An error relating to the camera server connection occurred. An unknown error relating to the camera server connection occurred. Add/Edit Recording Schedule dialog At least one day must be selected. At least one type of recording must be selected. The recording frame rate must be between '' and ''. You cannot use digital zoom when [Custom] is selected. If Night Mode is set to [Auto], please confirm that exposure is set to [Auto] in the camera control panel. [OK] was pressed without specifying the weekday. [OK] was pressed without selecting the recording mode check box. [OK] button was pressed after entering an invalid frame rate. Attempted to close the Add (Edit) Schedule Item with VB-C60 digital zoom specified while [Custom] was still selected. [Night Mode] was set to [Auto] while exposure was not set to [Auto] in the camera control panel. 9-22