Canon Vb-C60 Network Video Recorder VK-64/VK-16 Administrator's Manual - Page 117

Register Camera Server and Set Recording Schedule Set Normal Schedule Set the Night Mode and Resolution (VB-C500VD, VB-C500D, VB-C60, VB-C300, VB-C50i/VB-C50iR, VB-C50FSi, VB-C50Fi and VB150) 1. Select the [Night Mode] from the drop-down menu. You can select from [Not specified], [Disabled], [Enable], and [Auto]. Note z If you select [Enabled], the [Night Mode] status will be back to [Disabled] after the configured recording schedule finishes. z A higher resolution results in larger disk usage. Make sure you have enough disk space. z If you set [Night Mode] to [Auto], please make sure that [Exposure] mode is set to [Auto] on the [Camera Control] Panel. z The Auto setting for Night Mode can only be set with the VB-C500VD, VB-C500D, VB-C60, and VB-C300. z The [Night Mode], [Day Mode], and [Not specified] options for the Night Mode function can only be set with VB-C500VD, VB-C500D, VB-C60, VB-C300, VB-C50i series, and VB150. z Video turns to monochrome in the [Night Mode]. z If you specify [Auto], you cannot control the [Night Mode] using the [Camera Control] Panel. z You cannot use the built-in infrared lamp if you are using the optional dome housing. Tip z In the [Night Mode], set to [Enable]. After the schedule expires, the [Night Mode] will be disabled. z In the [Auto] mode, the mode automatically switches according to the brightness. 2. Select a [Resolution] for recording from the drop-down menu. You can select from [JPEG Small], [JPEG Medium], [JPEG Large], [MPEG-4] or [Not specified]. If you select [Not specified], the Storage Server does not attempt to change the setting, rather it accepts whatever [Night Mode] setting and resolution the Camera Server offers. Note [MPEG-4] can be selected for VB-C500VD, VB-C500D and VB-C60. 4-37